Megaraptor Replica Skull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:1 and 1:4 Scale detailed skull of a megaraptor
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
1:1 and 1:4 Scale detailed skull of a megaraptor. Does not have brain-case as I didn't find any good reference material for that.
This model was made for 300mm^3 print beds due to its size. The .STL files are massive, they may take a while to load and slice. The scale model should fit on most 3D printers though.
Recommended Print settings:
Infill - 15% or less gyroid pattern
Layer height .2 or less for more details
Enable supports (tree/organic supports recommended)
Assembly:
The model has alignment slots for pegs on each piece. For gluing the pieces together, I recommend using epoxy or super glue.