Air Pressure Peashooter from PvZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just peashooter from Plants vs Zombies that uses air pressure to shoot.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Inspired by “Air Pressure Tank” by Patopato_Design which has been reuploaded on printables at this link:
https://www.printables.com/model/1076641-air-pressure-tank
Please read the instructions before printing!
Quantity of parts:
- connector - two,
- ammo - as many as you want,
- other parts - one.
Assembly instructions:
1. On the first step you will need to put the spring into the pot. It should fit in the hole tightly and it shouldn't fall out.
2. On the second step you will need to put the head on the stem. It should fit tightly and shouldn't fall out.
3. On the third step you will need to put two connectors to the stem. They shoud make “click” sound and snap in place.
4. On the fourth step you will need to put the assembly of the head, stem and two connectors to the insert. Connectors shoud make “click” sound and snap in place.
5. On the fifth step you will need to put the assembly of the head, stem, two connectors and insert to the assembly of the pot and spring. It should fit tightly and shouldn't fall out.
Now you can insert ammo to the peashooter then punch his head!
Video on Google Drive that shows how it works:
https://drive.google.com/file/d/1pv-g8TuXy0LM3OMBwmiJ-gKgBsI-1qJY/view?usp=drivesdk
Printing recomendations: 0.15-0.2mm layer height, 15-20% infill, 2 walls, supports are only needed when printing the head, add brim if you have bad bed adhesion.
Recomended filaments: PETG for the spring, any filament for other parts.
Have fun!