Dual Talon Mag Picatinny Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for two talon mags to attach to a Picatinny rail.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the original model of the Picatinny Talon mag mount from Soggy_Auggy_20239587, but I wished that it was able to hold two mags and had a little more style. The holder works by friction fit for both the talon mags and the Picatinny rail. I tested the fitment and the mags and the holder would both stay on while shaking the blaster. On my print I did mess up and forgot to enable supports so my Picatinny rails is a little weird, but it still works.
IMPORTANT: You should only need supports on the Picatinny rail, not the hexagon cutouts or curved overhang at the top, I included a 3mf file which should only print the mag mount with supports on the Picatinny rail. If using the STL file, no supports are necessary for the hexagon cutouts and curved overhang, unless you feel that your printer cannot print overhangs well.
Printing Stats:
- Printed on Bambu Lab P1S
- Printed w/ supports on
- Printed w/ 15% infill
- Printed w/ 0.2mm layer lines
- Printed with the bottom of the mount facing the baseplate
Thanks again to Soggy_Auggy_20239587.