Mount for 2013 BMW X5 and X6 Carpuride Head Unit C94 AISN B0DHGPQDK7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for BMW X5 and X6 Carpuride Head Unit C94 AISN B0DHGPQDK7
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dash mount for the $79 Carpuride C94 ( https://amzn.to/48iGrer ) 10.26 ASIN B0DHGPQDK7 for a 2013 BMW X6 (should fit the X5) that I made for a friend. It sits in the factory cubby and holds the Carpuride head unit in front of the factory electronics. This is a great way to modernize your BMW dash with CarPlay and app capabilities.
The model I know works ends in 2mm it is the one pictured. I thickened the supports to 3mm in version 2 but have not tried it. The supports need to flex as seen in the pictures. I would start with the file that has “2mm” at the end. If your filament is flexible enough you could try the newer thicker support version.
Use a high temp filament since it will be in a vehicle with hot summers. I used Polymaker HT PLA GF: ( https://amzn.to/4olWJsW )