Flashforge AD5M Camera mount for 25mm x 30mm camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AD5M Camera mount using the USB Camera Module OV9726
- Ocena
- 3 / 5
- Polubienia
- 37
- Pobrania
- 170
- Wydruki
- 1
- Wyświetlenia
- 902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount was created to accommodate the OV9726 camera available through various online sources. My cost was $7.15. Search" USB Camera Module OV9726 ". This camera will plug into the USB on the side of the display. I am also working on an adapter to plug in directly to the back of the display board. This camera mount was modified from the original design of Doug Joseph -design8studio. The camera board measures 25mm x 30mm. I've adapted some clips to attach the board into the mount without the need for fasteners. Only a small screw to mount the assembly into the frame where the original camera would have been mounted. Just print and snap camera into place.
This will also mount on AD5X frame but printer is very finicky with brand of camera. May only work with oem camera.