Pellet Wok
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pellet Wok designed to fit in a empty .177 JSB Heavy tin. Pour a few pellets in and have easier due to the curved…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Pellet Wok designed to fit in a empty .177 JSB Heavy tin.
Pour a few pellets in and have easier due to the curved sides.
63.75mm in diameter
17mm tall
Super simple design, I've included the Fusion360 save file, so you can see how it was created for making them for your own tin sizes.
This will need laying flat on the bed in the slicer of your choice, I don't know why Fusion360 changes the orientation when saving as a .stl file.
Print Settings
Printer:
DMS DP5
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
10%
Filament:
Generic PLA PLA
Notes:
Sliced using Cura's 3.6 "normal .15mm" settings as a base;
1.2mm wall thickness
0.8 top & bottom thickness
Infill doesn't need to be any more than 10%, I have printed these at 5% with no ill effects.
Should print fine at either .2 or .1 resolution.
Category: Other