Spare for Birdfeeder / Ersatzteil für Vogelfuttersäule
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare part for pipe shaped birdfeeder from Nabu Shop Ersatzteil für Vogelfuttersäule aus dem Nabu Shop
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you are using this bird feeder https://www.nabu-shop.de/nigersaaten-futtersaule-metall-oder-kunststoff from the Nabu Shop, you may need this spare part.
It is one of my first designs which I made in Tinkercad and I am sure, there is room for improvement, but I have to say, the birds don't care. They use these stands no matter which color I print them.
To install the stand, the plastic part at the opening must be lifted slightly.
PLA, 20% infill, maybe add a brim for better bed adhesion.
Wenn du diese Vogelfuttersäule https://www.nabu-shop.de/nigersaaten-futtersaule-metall-oder-kunststoff aus dem Nabu Shop besitzt, dann brauchst du vielleicht dieses Ersatzteil.
Es ist eines meiner ersten Designs, das ich mit Tinkercad gemacht habe und ich weiß, da ist noch Luft nach oben. Aber meine Meisen haben es direkt angenommen. Sogar egal in welcher Farbe ich das drucke.
PLA, 20% Infill, vielleicht brauchst du einen Rand