1 / 4
Prusa MeanWell Power Supply Holder - Wall or Under Desk Mount — zdjęcie 1
1 / 4

Prusa MeanWell Power Supply Holder - Wall or Under Desk Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall or under desk mountable holder for the MeanWell 160W 24V power supply - the GST160A24-R78. Prusa Mini, CW1 etc.

Ocena
5 / 5
Polubienia
3
Pobrania
13
Wydruki
2
Wyświetlenia
113
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by the SL1S and CW1S power supply holder (https://www.printables.com/model/976727-sl1-sl1s-cw1s-powersupply-holder) by Julian (https://www.printables.com/@Julian_725960) but designed to fit my first edition CW1 power supply, which is a MeanWell 24V 160W max unit with the order number GST160A24-R78. The same power supply is used by the Prusa Mini and Mini + I believe. 

The model has space for 3-4.5mm countersunk wood screws (hole diameter 3.5mm) and as the design is mostly open, should allow for adequate cooling of the power brick. 

For testing purposes, I printed mine in PLA and it holds together well, but naturally a sturdier material like PETG might be preferable. Wall thickness is 2mm all round, so it prints solid. Supports are needed, this wasn't built to be bridged. 

Tagi