1 / 1
4" Flexible Duct Barb With Flange
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A good way to connect (non-heated!) flexible ducts to flat surfaces.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
DO NOT USE THIS TO VENT DRYERS. Dryer exhaust is hot.
A bit of a tight fit for reinforced flexible 4" ducts but they'll be held very securely!
The flange is a hair too thin for any real support, but it worked for my usecase.
Flange is just under 150mm diameter. Narrowest part of barb is 100mm; thickest is 105. Walls are 2mm diameter.
I printed this in Overture PETG on a Creality K1C; it took 100g filament and 2 and a half hours.
