PKI RR Skeletonized but MINX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Still baller, just a little smaller!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print all the files from the PKI RR Skeletonized LYNX, except the shroud and spacer (print my stock file too if you have issues with the ram seating but keep in mind it's not perfect yet but has never failed me). Please print the tall stuff slow and use supports.
Other things I recommend are Poppy's Sear, Nutty's catch 3, and a 3 degreed angled riser.
One final thing is that be patient. It took me 6 tries to get the receiver to print (DONT USE TREE SUPPORTS FOR THE RECEIVER, USE NORMAL SUPPORTS). Also there needs to be lots of sanding, the tolerances are TIGHT. But the end product is well worth it! I find lubing your bars on the inside and just pumping it a lot after sanding will make it ultra smooth.
Good Luck!