3D Scanner Tiny Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny Marker to aid in 3D Scanning a Model
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM:
1x 8x3mm Round Magnet
1x M4x10mm Socket Head Cap Screw
INSTRUCTIONS:
The Model is about 50mm Tall with a 40mm Diameter requiring neither Supports nor a Brim.
There are to Versions of it, one for accepting an M4x10mm Socket Head Cap Screw ( acting as a Weight and for placing onto Rotary Table ) and another for accepting an 8x3mm Magnet ( for attaching to metal Surfaces - Will wander on the Rotary Table! )
To aid with 3D Printing the Counter Bore Hole of the M4 Variant under Bridging you'll need to enable Bridge Counterbore Holes > Sacrificial Layer:
I've designed their Bottoms as a Separate Part to be colored in a Different Filament for easier telling apart.
You'll be needing 3x ID 3mm / OD 6mm and 3x ID 6mm / OD 10mm Scan Markers per Tiny to populate it like in my Suggestion.