Rossinante - Tapchanger shuttle with cpap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added to tapchanger shuttle : belt holding for up to 10mm wide belt, eddy self-thread on the back and cpap + duct
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The whole contraption is really messy and the is sketch rather dirty, parts have many artefacts, it could use a lot of refinement but i'm not willing to give it right now.
It's not blowing straight and might be slightly rotated. The blowing issue can manually (lighter+screwdriver) be adressed quite easily.
One may easily adapt it for cartographers, i guess..
Print at your own risks !
Siraya ABS GF : 4 walls + 33% gyro infill = 40g
I managed to print multiple version in ABS-GF as PA6-CF and they came out great.
I printed from 3 to 5 shells and 30-45% gyroïd infill.
This model has few easily removable supports integrated for better printablilty.
V2 centers the cpap
V5 adds a slot for m2 inserts to place a microswitch as X endstop. also has sides thinned to get 20mm back on x with funssor cnc gantry.
V5 also might hit rear plexiglass