1 / 1
Diameter gauges 2-30mm & 31-45mm (1mm increments) with opening angle of 45°, 60°, 75°, 90° & 135°
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having an opening angle that's less than 180° can be useful if you are measuring the size of a fillet, for example.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (22)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane
Disclaimer: If you print this a fdm 3D printer (which you probably will) it might not be so accurate, especially for the smaller semi circles. Also, I don't recommend printing this with a material that has a lot of thermal expansion (such as ABS and ASA) like I did.
Note: Sorry I didn't add numbers under eatch semi circles to indicate their diameter, but there simply wasn't enough space and I was feeling a bit lazy.