Seat Risers - FeelFree Moken 10 PDL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 inch seat risers for the seat on a Moken 10 PDL kayak.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Print with a strong material. ABS, ASA, and Nylon are all good options.
You will need to pause the print to insert M5 square nuts. Use the slicer preview to select the final layer before the nut pockets get covered up.
The FWD risers clamp down over the chair arms using M5x20 socket head cap screws. This prevents the risers from rocking backward when you pedal hard.
The M5 square nuts in the AFT risers are optional. They are included incase I ever think of something I want to bolt onto them.
You will need to get some M6x80mm screws to attach the AFT risers. You will also need to drill out the holes in the top of the rear seat track to allow the longer fasteners to pass through.