1 / 2
Trays for Silica Gel Recharging in PrintDry Pro — zdjęcie 1
1 / 2

Trays for Silica Gel Recharging in PrintDry Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Half and Full Size Custom Trays fit in PrintDry Pro for Silica Gel Drying supporting materials up in the airflow

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These Trays provide more efficient and effective drying of silica gel packs and raw beads in the PrintDry Pro filament dryers. The Half Trays will print in a Prusa Core One, the full trays require a 300mm size printer.

To dry raw beads use organza or other temperature resistant mesh bags to support them and provide good airflow.

Print these trays with filament that will handle the 75C drying temperatures such as ABS, ASA or PC-Blend. Tested with Esun ABS+ in the PrintDry Pro at 75C settings. PLA and PETG will have problems with the drying temperatures in the PrintDry Pro so are not recommended.

These trays may also fit the PrintDry Pro II, the half trays were verified in a PrintDry Pro and they appear to be the same size as the newer model but I don't have one to verify the fit. The filament used will have to handle the slightly higher 85C temperatures, and the recommended ABS, ASA or PC Blend should work for this.

Designed using OpenSCAD free CAD software for making your own designs.