Kärcher WVP10 Advanced – Wiper Head Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom storage system for the Kärcher WVP10 Advanced
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is Part 4 of my custom storage system for the Kärcher WVP10 Advanced.
After creating holders for the device, the water container, and the wipers, this part focuses on the head — the component that connects the wiper to the handle.
Design Purpose
The head is surprisingly unstable when placed on a flat surface and tends to flip over easily. To avoid accidental drops or damage, I designed a dedicated holder that keeps it safely in place and ready for storage.
Design Features
Stable support using the suction tube:
The holder uses the geometry of the suction tube to guide the head into the correct position.
Integrated support shoe:
A small “shoe” at the base keeps the head securely locked in place so it can’t tilt or fall forward.
Wall-mountable:
The holder can be installed with a single wood screw, just like the other parts in this series, keeping everything consistent.
Support-free printing:
The model is fully printable without supports, staying true to the design philosophy of the whole WVP10 Advanced holder series.