1 / 1
remix of the original scrab made by Loubie3D — zdjęcie 1

remix of the original scrab made by Loubie3D

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

added magnets and changed the lock a tiny bit

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked the original design and kept it mostly unchanged.

Scale:
Print all original parts at 200%. The files attached here are already scaled correctly, so no additional resizing is needed.

Modifications I made:

Added circular magnet holes — you can choose either size. I used the first option.
Magnets help keep the lock closed so you need to actively pull to open the top.

Center magnets: 6×3 mm (diameter × thickness)

Side magnets: 5×1 mm

Improved lock engagement:
I slightly increased the protrusion on the bottom lock piece so the top lock catches more securely.

New “head lock” part:
This replaces the original cover lock. You can either attach it in your preferred CAD software (supports are minimal when printing) or glue it after printing (that’s what I did).
I wasn’t sure about the exact placement for proper engagement, so I printed, test-fit, and then glued it.

Bottom lock piece (“lock p1s”):
Print with minimal, build-plate-touching supports. It’s hidden once assembled, so support scars don’t matter.