LED Halo Clamp For Additional Motorcycle Lighting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Halo Clamp For Additional Motorcycle Lighting
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v2.0
My son wanted to pimp his motorcycle by adding an additional set of lights. On top of that each light would be pimped as well by adding a LED Halo.
This model combines the following functions:
- A holder for the LED Halo (no glue required because it is a tight fit).
- A clamp that can be bolted to each light.
- A placeholder and protection for the wires that are to be placed in a recess.
The wiring instructions are not part of this document.
Parts List
- 1x Set Of Lights.
- 8x Bolts.
- 2x LED Halo.
- 1x Motorcycle.
Printing
- Fill density: 80%.
- Fill pattern: Grid.
- Support: Snug.
- Filament: I recommend PETG because it's less brittle than PLA (vibrations are to be expected whilst riding).
Note: When choosing the print direction there's always a balance between looks and sturdiness. Therefor a severe stress test was done by attempting to tear off one of the stems. Turned out that the weakest link was not in the stem itself so the choice of print direction passed.
Assembling
That's just a matter of clicking the halo in place, guiding the wires through the recess and bolting the assembly to each ligth.