Challenge Coin Holder (Desk or Wall Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple holder for a 2 inch diameter challenge coin. I received one from Flitetest during their Edgewater…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 776
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a simple holder for a 2 inch diameter challenge coin. I received one from Flitetest during their Edgewater Airpark funding and wanted to mount it to the wall where my quads/helicopters/planes hang.
I used a piece of command strip to mount it which seems to be working fine, but also incorporated a recessed hole for a screw (M3 flat/tapered head) if you'd like that option. This will also sit on a desk and hold the coin as well.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
No supports are needed if printed in the orientation in the stl. I printed it in Sainsmart white PLA. It took about an hour to print at 15% infill.
Category: Decor