Feiyu Tech Mini 3D Electrohub Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a Feiyu Tech Mini 3D gimbal to mount to my electrohub. The mounting plate is designed to fit many…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I bought a Feiyu Tech Mini 3D gimbal to mount to my electrohub. The mounting plate is designed to fit many commercially available quads, but does not match up with the camera rails on this multirotor. This plate matches up with the six M3 sized screw holes in the included gimbal mounting plate and allows it to be easily attached to the rails via the screw included from flitetest.
Print Settings
Printer:
Davinci 1.0a
Rafts:
No
Supports:
No
Resolution:
0.2mm
Notes:
I printed this at 0.2mm layer height and 15% infill. It is strong enough, but I would recommend printing with a slightly higher infill and thinker walls. The inner part of the plate can deform slightly if you over tighten the bolts.
Category: R/C Vehicles