1 / 3
3649 Stone Gray Lego 40 teeth gear with Zebra DNA — zdjęcie 1
1 / 3

3649 Stone Gray Lego 40 teeth gear with Zebra DNA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-colored remix of the stone-gray part

Ocena
5 / 5
Polubienia
5
Pobrania
66
Wydruki
1
Wyświetlenia
191
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: The original gear works fairly well in ABS using a 0.25 mm nozzle (rather high layers e.g. 0.15 mm. PLA is not recommended as it creeps under stress.

The two-colored print takes ~70 min / unit plus shared wipe tower.

Support removal is quite tedious. PLA supports for an ABS/ASA part might be a good idea (untried).