Bag roller by Andrey Shayter (but longer for bigger bags)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a longer roller to be able to roll slightly bigger bags, so I stretched the original model a bit!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a longer roller to roll larger bags, so I quickly made this model with a longer stem and body. Works exactly the same as the original.
I've included pictures with the recommended print orientation, as well as a close-up of the flattened side of the stem, which should be face-down on the build plate for the best end result. I plastic welded the stem to the washer using an old soldering iron, but something like hot glue should also suffice. I also plastic welded the hinge in place, but glue should work there too.