Sicce Whale Inlet/Outlet reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sicce Whale 120 and 200 canister filter inlet and outlet couplers may fail at the seam. This ring reinforces that seam.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Sicce Whale 120 and 200 canister filter inlet and outlet tube to hose couplers may fail at the seam and start leaking. This ring reinforces that seam and can be used as a preventative measure or to repair a seam that has started to leak.
The coupler, highlighted in green, has a seam highlighted in red. This is the seam that can crack due to the pressure from the rubber O-ring underneath. The reinforcement ring applies pressure from the other side and prevents the coupler from cracking.
The reinforcement ring can be attached as follows:
Remove the hose from the coupler
Unscrew the coupler from the inlet or outlet body
Slide the reinforcement ring onto the coupler from the hose end
Place coupler on solid surface and force* reinforcement ring all the way down so that it is flush with the edge of the coupler
If your coupler is already cracked you can apply super glue to the crack before attaching the reinforcement ring, the ring will force the crack closed and the super glue should prevent any micro leaks
*Note that printer tolerances will vary, you may need to slightly adjust the scale when printing. The reinforcement ring should be very tight without being impossible to slide all the way down. You can use the tool provided to push the ring down firmly.