G29 Sequential Shifter / E-Break Drop in For Gated Shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something simpler that didnt require unscrewing the gates to swap in and out, or required multiple parts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is compatible with the magnet remix of this shifter gate for the g29. the file should be printed as is 15-20%infill
Can be used as an E-break or sequential shifter.
To assemble, remove current shifter knob (many models available that dont need to be screwed on and off, but can be) drop on the plate, put on your hair ties or rubber bands then replace the shifter knob and you're all set, the hair ties will hold the plate firmly in place
The part connecting the two sides could use a bit of reinforcement, but it has not risk of breaking when installed, and should work fine split in two or be easily repaired. If I make a V2 I'll upload it here, but feel free to remix it, plenty of room on the plate to add engravings.