1 / 8
Case for WAVGAT / ATGM332D Mini GPS Module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, vented snap-fit enclosure for the WAYGAT/ATGM332D GPS module with SMA cutout.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a custom-designed enclosure for the WAVGAT / ATGM332D Mini GPS modules commonly found on electronics marketplaces. It features a compact design with a snap-fit lid, ensuring your module is protected and cool while remaining accessible.
Key Features:
- Precise Cutouts: Includes a 6.5mm square cutout for the SMA antenna connector and a slot for the 5-pin header.
- Ventilation: Honeycomb pattern on both the top and bottom to ensure airflow and prevent heat buildup.
- Internal Clearance: Designed with 7mm standoffs and 7mm top clearance to accommodate components.
- Snap-Fit Design: The lid snaps securely into place without the need for screws or glue.
- Parametric: OpenSCAD source file included if you need to adjust tolerances or dimensions.
Print Instructions (Prusa i3 MK3S+)
This model is optimized for printing on the Prusa i3 MK3S+. No supports are required as the bridging for the cutouts is minimal.
- Material: Prusament PLA
- Layer Height: 0.15mm QUALITY
- Infill: 20%
- Infill Pattern: Grid
- Supports: None
Retraction Settings:
- Extruder 1 Retraction Length: 1.8 mm
- Extruder 1 Retraction Speed: 50 mm/s