CR-6 SE Gantry Mount Spool Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket was required due to space constraints (as shown in pictures), my printer could only fit on an angle due…
- Ocena
- 3,5 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 489
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This bracket was required due to space constraints (as shown in pictures), my printer could only fit on an angle due to the width increase of the standard spool mount position.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
Yes
Infill:
100%
Filament:
Creality PLA
White
Notes:
Printed with Creality supplied PLA on CR-6 SE.
200/600.16mm Layers
Sliced in Cura, printed using tree supports
Post-Printing
Not the best, but I cleaned up minor stringing with a lighter and small razorblade.
How I Designed This
After searching for a while for a suitable bracket, I couldn't find anything that tickled my fancy so I decided to design my own.
This was designed by taking relevant measurements from the printer gantry and the OEM spool holder bracket with Vernier Calipers. This was then drawn up in Fusion360 and exported as an STL for slicing. The design includes filleted edges to help improve strength.
Note - the lower bolt hole is modelled with an M5 thread to suit the standard mounting bolt. When printed, the thread was unsuccessful however the hole is a good diameter so that the bolt still threads in nice and securely.
Category: 3D Printer Accessories