Spiral Ribbon Christmas Ball 2025
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beautiful ornament that looks great in any kind of filament, including translucent colors. Very light.
- Ocena
- 5 / 5
- Polubienia
- 460
- Pobrania
- 1811
- Wydruki
- 3
- Wyświetlenia
- 5522
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The model has 2 small holes at the top to make it easy to add a thread to hang the ornament. The holes are great for thin threads, but may not work for everyone. I've also provided a version of the STL with no holes so you can add your own.
You can add holes without changing the geometry of the model. Just add a cylindrical shape modifier the size and place you want to add a hole, then set the properties of the modifier to 0 for top, bottom, infill and perimeters.
I've provided two PrusaSlicer project files and GCODE files for a PRusa MK3S+ printer. One is for opaque filaments, the other transparent/translucent filaments. The opaque version has 2 perimeters at the bottom, 3 at the top, and 1 in the middle of the ornament. The transparent version has 1 perimeter everywhere, less dense infill, and prints a little hotter.
If you use your own settings, it needs a little infill at the very top and bottom. I used 20% lightning infill for opaque filament and 10% for transparent.
You will need supports. I used organic supports with an overhang of 30 degrees and added paint-on supports at 20mm and 60mm. The paint-on supports might be more than you need, but the print worked beautifully and released easily.
I recommend using the Classic perimeter generator, not Arachne (the default in modern slicers).