Auto Bed Level probe for Geeetech Prusa I3X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Hi all, I made this support and this servo arm to enable the AUTO BED Leveling on Geeetech Prusa I3X without changing any component. The servo arm is realized to be able to get stuck on the support of the extruder and to be integral with it to prevent movement which could cause a wrong measurement. To realize the servo arm the printing process must be paused at the 20th layer and after that you need to insert the original servo arm in the new arm created, after that you can continue the printing process. The servo used is a digital 5V servo purchased from HobbyKing for a few dollars. The exact model is: HKSCM9-5
I have also uploaded the modified firmware for this (my) printer only: Geeetech Prusa I3X Acrylic.
Remeber also that you need to modify your slicer adding a custom Gcode. After the G28 command (for homing) you need to add G29 (for auto bed leveling).
Print Settings
Printer:
Geeetech Prusa I3X
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2
Infill:
40%
Notes:
all this parts were printed in ABS, remeber to pause the printing process at layer 20 of the new servo arm to insert the original servo arm inside the piece.
Category: 3D Printer Accessories