Infrared IR Illuminator Shelf Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shelf clamp for IR illuminator for security cameras or VR headsets
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
A shelf clamp for IR illuminators so you can mount to the end of a shelf and not a wall or ceiling. It is purely friction fit, no screws or anything necessary.
IR illuminators will enable you to play VR with inside out tracking (Pimax Crystal Super, Meta Quest, etc.) in a dark room, enhancing immersion. Having 2 or more illuminators helps with tracking too as it gives the internal cameras very bright static references points to triangulate positions.
I designed these clamps to fit these specific IR illuminators from Bezos's Bag of Tricks but they should work with any similar design like these alternatives. I also paired them with cable extensions to route the power cable along/behind my shelves for a cleaner look.
I like to print this at 0.08mm layer height so the threads are super clean, but they work at 0.20. Make sure to use supports for the clamp, only the two posts that stick out need the supports. Make sure there are no supports on the threads.