Modern Decorative Christmas Star *NOW WITH BASE*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw something simmilar but it was very expensive. So i made my own Design but bigger and better.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
You need to print the Case L+R 4 times and the Top once. you can use the gluing rig or glue the edges with a clamp. The gluing rig need m3 threaded inserts and M3 bolts. Then stick a LED light strip up to 12mm wide on the inside. At the end you need to glue the light deflectors on top (you need 10 light deflectors). They are very thin, so white PLA should work but needs bright LEDs. Use the hole to thread a USB cable or other cable through the Star and Hang it from said cable. the star should wheigh about 250g.
UPDATE V1.1
Now with a Base!
The base is designed to be battery powered with one or two 18650 Li-ion Batteries. I used a cheap 1A li-ion battery charger from ali express you can find for as low as 25cents. For the computing power i used a ESP32C3 supermini which the slot on the left side is for (for better wifi reception). But you can use what you have.