1 / 5
small picture frame - camera body - (3x4,5 cm pictures) — zdjęcie 1
1 / 5

small picture frame - camera body - (3x4,5 cm pictures)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small funny picture frame, that should look like the picture is taken right now.

Ocena
5 / 5
Polubienia
47
Pobrania
127
Wydruki
0
Wyświetlenia
855
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution

It is quite a small design made for the "Picture Frame" contest. I wanted to try a little mechanism I designed and play with surface textures a bit. So the handle should look like leather and the mechanism allows the picture to be slipped into the frame and then simply snapped on.

 

It should fit a 3x4,5cm picture. 

- It may not be possible to scale up the print much, because if the mechanism become less flexible as it gets larger. I have not tried it, so I do not know when it will become to stiff to work porpaly.

 

The build

  • It is divided into 3 parts
    • 1- The camera
    • 2- The lens
    • 3- The screen
  • The camera (1) and lens (2) need to stuck togheter and are held in place with filament passed through the holes. It should fit tightly. The filament can get cut flat to the surface.
  • The screen (3) snaps into the camera (1) by inserting the round end into the right corner and pushing in the left end. The open part of the screen (3) should face down.
  • To get the screen out again, push something (like an allenkey) in the hole on the left.
  • There are two slots on the back for hanging with flat head pins on a cork board.

The print

  • The parts should be oriented in the stl
  • I printed the screen (3) with support so I can orient it as in the stl. I did it because you don't see any bridging that way.
  • my printtime: 5h 56min (layerhight 0.12, without support (exapt for part 3))

 

The best part of designing is to share Ideas and see others enjoy them. It would be great to see your makes and get some feedback.

Tagi