Case for ESP32-Camera with USB shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix: Case for ESP32-Camera with USB shield
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 937
- Wydruki
- 8
- Wyświetlenia
- 4320
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix from https://www.thingiverse.com/thing:3463679 . Thanks mojocorp for the great case design.
I added a GoPro type mounting as described in https://www.thingiverse.com/thing:4072374 and I extend the case to fit for a ESP32 CAM with an attached programming shield (ESP-CAM-MB). The shields usb is also used as power supply interface.
Print the case with the camera opening top with 0.2mm. I use variable print setting in PrusaSlicer to set smaller steps (0.1mm) at the curved front part.
Update 08.08.22:
Thanx to Riconec, I load new design file for the CAM body and back. I unintentionally load the original design and not my design which fits the USB exender.