1 / 8
Hercules DJ Knobs in the glory of Dummy 13 (for D shaft encoder, 6mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enhance your DJ knobs with Dummy 13 parts and accessories.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (36)Powiązane
About:
Connect any part of Dummy13, or anything with the same type of connection. Now you can be creative and show me what you've managed to do with it.
Dimensions & Compatibility:
- There is no need to change the dimensions of the Dummy parts.
- Tested on Prusa MK4S printer
- Recommended material for joints:
- PETG
- (PLA can also be used, but it is more difficult to assemble and can break more easily)
- Recommended material for knob and ring:
- PLA or PETG
- Includes ready-to-print G-codes
Compatible models:
- https://www.printables.com/model/999963-dummy-13-extra-hand-poses
- https://www.printables.com/model/981111-dummy-13-version-10
- https://www.printables.com/model/1215186-dummy-13-hand-megapack-on-runners
Print settings:
- 2 perimetres
- 15% infill
- 0.15 or 0.2 mm layer height, 0.4 mm nozzle
- Print orientation as in the provided file
- No supports needed
Assembly:
- Simple snap-fit solution


If you have any ideas or feedback about the model, please let me know.