PEBA Drone Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light weight 3" toothpick drone shell. Use supports. PEBA is about 20% lighter than TPU.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
PEBA drone canopy, specifically designed for a Happymodel Crux3 toothpick frame The main body features integrated honeycomb ventilation patterns on the top and sides for cooling, with a wall thickness of approximately 1.2mm. The front section includes a dedicated 14mm nano camera mount with an open lens aperture. The rear section transitions into a complex, lightweight lattice structure antenna holder, with strut thicknesses of approximately 0.8mm, designed to secure a U.FL antenna stem. The base of the canopy has two M2 screw mounting holes on each side, spaced for a standard 25.5x25.5mm whoop flight controller mounting pattern. The overall dimensions are approximately 45mm in length, 35mm in width, and 25mm in height.