Christmas tree ornament string Snowball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas tree ornament with overhangs
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- GNU General Public License v3.0
*The cover picture is AI edited.
The model is available in three dirfferent sizes.
Large: ca. 90mm; Middle: ca. 80mm; Small ca. 60mm
If you want to make changes in size or string/branch length you can modify the SCAD code.
Assembly:
Glue the correct cap onto the main body
Print settings:
To achieve the desired results print the model as shown in the picture
Printmaterial:
I used PLA
Settings: 5-10% infill are enough
0.25 mm layerhight
Supports: none
Brim: Yes, about 10mm
Printer: Prusa mini +
Printtime:
small: ca. 3h middle: ca. 5h large: ca. 8h
For the first few branch layers a high fan speed is neccessary after that the fan sepeed can be lowered.
By changing your print speed and fan speed you will get different results: slow perimeter and high fan give you straight branches. Fast perimeter and low fan make curly branches.
If you have any suggestions for improovement feel free to coment.
------- HAPPY PRINTING :-) ------