1 / 11
Yagi antenna clamps and dipole for 23cm or 869 or 915 MHZ — zdjęcie 1
1 / 11

Yagi antenna clamps and dipole for 23cm or 869 or 915 MHZ

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yagi antenna clamps 4 mm éléments and dipole 15 mm boom.

Ocena
0 / 5
Polubienia
13
Pobrania
71
Wydruki
0
Wyświetlenia
817
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Elément diameter : 4 mm for 15 mm boom.

use aluminum for the elements and brass for the dipole.

Fix with nut and M4 screw.

PETG.

 100%.

Perimeter  x 6 .

This design remains experimental errors are possible. 

Particular attention will be required for the dipole, tinning with a high-temperature flux and very short

 soldering time.

 First, tin the coaxial cable braid.

This antenna was built for 869 MHz. Other frequencies are possible.

I used an online calculator on the 3g-aerial website.

Please take into account the regulations in your respective countries.

Don't forget to indicate that you like the model on printable.com.

Please send your opinions for future improvements.

and take the opportunity to see the older models.

73 F1NSR Yannick.

Tagi