1 / 6
50mm to 60mm fanplate adapter Pinball 2000
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate to mount a 60mm fan to the original 50mm heatsink of a pinball 2000 motherboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It converts a 60mm fan to the 50mm needed on the original heatsink.
I used a Noctua NF-A6x25 FLX as described in the original source below.
You can measure the height needed to get it flush, I can't remember which version i've used but seeing the photos and looking at the CAD file it must have been the 7mm version.
Please see “Model origin” for original source.
I chose the license based on the original upload of the DXF.