Color Swap Minder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep track color swaps during multicolor prints using your filament swatches. Stop forgetting which color comes next!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Description
Find yourself in middle of a color swap and forget which color comes next? The Color Swap Minder solves this problem by giving you a physical way to organize and monitor your swaps using your existing filament color swatches (in this case, Ty10y’s filament test swatches style in an upright position. To use:
- Grab the set of swatches you need for your multicolor print and place them in the “Queued” slots in order.
- Move the first color swatch to the “Active” slot and start your print job.
- As colors are printed, move the swatch from “Active” to the “Printed” slots and continue with the next color.
Sizes and multi-language support
Two sizes of the model are available: 6- and 8-slot versions. Both sizes are available in more than 20 languages. See the attached images to map a language to the identifying code. Tops for the boxes are available as well.
Print Settings
- Layer height: 0.2 mm
- Infill: 10% to 15%
- Supports: No
- Brims: No
- Filament: PLA
Feedback
Let me know if you run into trouble or if I have been misled by the online translators.
Licensing
The Color Swap Minder model is my own work and is licensed as “Creative Commons — Attribution — Share Alike”.