Coaster with bottle opener & protective feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drinks Coaster, with a bottle opener and protective feet.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drinks coaster with a surface for any cup,mug, bottle,can etc up to 100mm. Its made with spaces for a 100mm cork insert, 40mm bottle opener and protective 22mm circular feet all linked below. The feet are adhesive and I screwed the bottle opener into the PLA by heating the screw tip first.
The print is orientated upside down for a cleaning print on the larger visible suface (underside). This takes roughly 15 minutes longer, but only 2 extra grams of PLA.
Stainless Steel bottle opener: https://www.amazon.co.uk/dp/B0BN1WQ42L?ref=ppx_yo2ov_dt_b_fed_asin_title
8 Cork Mats: https: https://www.amazon.co.uk/dp/B0CQR3N147?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1