1 / 4
OG Apex Walksnail Moonlight (and Avatar Pro V2) Camera Mount — zdjęcie 1
1 / 4

OG Apex Walksnail Moonlight (and Avatar Pro V2) Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little remix of @krhom's awesome DJI O4 camera mount, for Walksnail.

Ocena
0 / 5
Polubienia
2
Pobrania
31
Wydruki
0
Wyświetlenia
236
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution
  1. Print in TPU (I used 20% cubic infill).
  2. I only use the top screw mount, friction is enough, and you can adjust camera angle that way.
  3. M3 hex nuts will work (see original model from @Krhom!), but you might have to hold them in place with pliers when installing, but I didn't have to.
  4. Check out @Krhom!
  • Note: I did not test this mount with the Avatar Pro V2 camera, but I have one, and I am 99% sure the camera mount and dimensions are the same as the Walksnail Moonlight camera.

Tagi