1 / 2
Stopper for Skådis Dupont Hanger — zdjęcie 1
1 / 2

Stopper for Skådis Dupont Hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds the jumper wires in place when adding/removing from the "Skadis Dupont Hanger" from MakerWorld.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an add-on for Skådis Dupont Hanger from MakerWorld

When either hanging up or removing jumper wires from the holder, it is very easy to accidentally bump into something and cause the cables to fall off the holder. So i made a stopper in TPU you add to the holder after adding/removing wires.

Print with TPU.

Tagi