Center Monitor Webcam Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a webcam mount at nearly eye level that had minimal monitor intrusion. Initially I set out to print this in…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a webcam mount at nearly eye level that had minimal monitor intrusion. Initially I set out to print this in its entirety. The first two revisions lacked sufficient Z support for my Logitech Brio webcam. Heavily inspired by the Plexicam I decided to print the monitor hook and webcam shelf.
My monitor top is ~1.4" deep, and the hook is 1.4" tall (in the stl). The monitor hook and shelf are parameterized models, but I made alterations before printing them (stls and F3d attached).
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
.15
Filament: Jayo PETG Black
Category: Computer
