135 Film Holder, 3 Slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A film pod for holding 35mm film, friction fit
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There's a few of these around, but this is my one!
This is a friction-fit 35mm film holder/pod for carrying 3 rolls of film with you. I've designed it to hold the film leader secure whilst also still being able to see the label on the canister. Because it's two separate pieces you can print a few of these and mix up the different parts to create split-toned versions.
I've printed a bunch of these in Polymaker PolyTerra PLA and some other filaments, and the fit seems pretty consistent. It will be a looser fit in cold conditions, but that's intentional as otherwise it'd likely jam in hot conditions.
I've refined my print settings for this over time, so I've included my OrcaSlicer process preset file for reference. OrcaSlicer sometimes reports an error about non-manifold edges but as far as I can tell it's irrelevant.
I would recommend printing this in object order so that you don't get more obvious lines on each part as the printer does the slow lower layers for the other. It should automatically place the seam on the angled corner but I paint mine manually for better alignment. Some other key settings I've found are enabling ironing for the top-most layers and setting ironing flow to 30%, arachne walls with 3 wall loops and inner/outer/inner order, 10% sparse infill with grid pattern (feel free to experiment here).
No supports or brims necessary, but make sure you level your bed properly to get a nice finish on the bottom of the two parts.
I have a 120 variant coming soon and 5 slot versions of both at some point too, though I've been told that I'm a bit of an outlier in carrying at least 5 rolls with me at all times so \_(ツ)_/