1 / 5
FIAT BRAVO 2 top cover mount — zdjęcie 1
1 / 5

FIAT BRAVO 2 top cover mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hi, so it is a sun cover mount for a driver side. Mine had broke, and had to do it myself cuz i'm not gonna pay for new

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
174
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Hi, so it is a sun cover mount for a driver side.
Mine had broke, and had to do it myself cuz i'm not gonna pay 100-200 polish złoty :D
I'm a true onion guy! :D

You might need to grind your current cover rode that goes into mount to fit in this one.
Current one works without using a gule, but if you didn't calibrated your printer goood enough. There might be a need to use a glue.


100% infili - pet-g - 265C - FAAAST - outer wall 60mm/s on P1P heavy moded - layer height 0.08mm with supports


 

If you have found that project good, here is a page where you can buy me a coffee and vote on what i will do next: https://ko-fi.com/thesunshinedude

To sell my models as a 3D prints or similar, you only need to sub my Ko-Fi profile for 5$
I work on 3D models all the time, so there’s always something new each month.


Or just drop a like on my artstation: 
https://www.artstation.com/lukasz_kiebala

Support and request:
[email protected]
https://discord.gg/6NKQtxDTGQ

Best regards, Sunshine

Tagi