Elegoo Mars 3 Build Plate Holder (2020 extrusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Mars 3 build plate, mounts into 2020 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a holder for the build plate for the Elegoo Mars 3. It can hold the build plate in either an up, down, left, or right orientation depending on how you mount it to the 2020 extrusion and can easily be rotated in 90-degree increments depending on your needs. I have tested this with my Mars 3 build plate, but if the mounts are the same as any of the other Elegoo machines, it will also work for those build plates as well.
My main use for this is holding my build plates after prints are washed while I thoroughly dry them before curing, and for general storage.
I modeled in a hole for an M3 SHCS to hold the model to the 2020, but the fit is snug enough that I personally do not use it.
I have also tested it with Misumi 2020, and generic 2020 from Ali, and it fits both.