Prusastrat - one peice pick guard, and back cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stratocaster based prusa guitar
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you make it, please please share a make, this took me, and the other contributors who started the projects tons of time!
Made this wonderful project for my partner, and didnt like the finish of the original pick guard, being two pieces,and not really consistently chamfered.
So I fixed it :) added some fun art, and then created a back cover as well. I just used some small self tapping screws to attach it.
My print settings and materials:
Main guitar body was done in 42% cubic infill, 6 walls, 6top/bottoms, and used fiberon asa-cf08 this has held with no signs of creep for several weeks now, and holds tune well.
The hexagons are all in polymaker abs uv reactive magenta, the remaining black sections were esun abs-cf at similar settings to the main body.
the pick guard is glow green polymaker abs, with uv magenta, uv yellow, galaxy purple, and uv green.
the back cover is polymaker abs black, with uv abs magenta, and abs pink
I will note the existing trem cavity on the back is a little small, so you may need more than the typical 3 springs, or heavier springs to fully get it working.