1 / 2
Legion Go 2 Belly Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight, minimal belly stand designed specifically for the Lenovo Legion Go 2.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 1064
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Features
- Secure Clip Fit – Uses a dual-point friction mount (vent lip + bottom edge) to stay locked onto the device without scratching.
- I/O Cutouts - Bottom cutouts allow use of the headphone jack and USB-C port while in use (may vary from cable to cable).
- Airflow-Safe Design – The intake opening on the rear stays fully unobstructed, so thermals remain unchanged.
- Minimal Footprint – Adds almost no bulk. Perfect for gaming while sitting or reclined.
Printing Tips
- Material: PLA works great
- Layer Height: 0.20 mm
- Walls: 3–4 walls recommended for clip strength
- Infill: 20% is plenty
- Orientation: Print flat on its side for speed
- Supports: Yes
Installation
- Hook the top edge of the stand over the Legion Go 2’s rear vent lip.
- Rotate the stand downward until the bottom clip seats against the lower edge.
- That’s it! Removal should take marginal effort while still locking in enough during use.