R 1/4" - R 1" / Pipe gauges for threaded steel pipes (DIN EN 10255) / Lehren für Stahl-Gewinderohre
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of Pipe Gauges to determine the nominal size of (DIN) EN 10255 steel pipes by it's outer diameter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Set of 5 Gauges for steel pipes according to (DIN) EN 10255, whose nominal size is determined by the inner diameter or the pipe thread.
Their nominal size is given in inches, but the outer diameter is significantly larger.
Sizes R ¼" - R 1"
Pipes like these are common, for example, in older water and heating installations in Germany and other European regions.
These gauges are designed to help determine the nominal size in order to select the right accessories for extensions or the right size for new pipe insulation, and stuff like this.
The gauges are marked with the nominal size, e.g. 'R ¼' and the outside diameter (AD) in mm according to (DIN) EN 10255.
Outer dimensions are 40 x 100 x 3 mm for each, with a 5 mm hole to thread them on a string or a piece of wire.
I made individual gauges for each size instead of one large plastic piece with all sizes, as I find them easier to use this way, e.g., in tight spaces between other pipes and insulation.