1 / 6
Mean Well LRS-350-24 mount for Tevo Tarantula Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mean Well LRS-350-24 PSU mount.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 766
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (16)Powiązane
Remixed for my Tevo Tarantula Pro. It uses the stock IEC plug and switch assembly.
Screws Used:
- 8-10 x M4 Screws (4 for the PSU mount, 2-4 for the base to frame, 2 for the top mount to frame)
- 4-6 x M4 T-Nuts (for the frame mounts)
- 2 x M3 Screws (for the plug assembly)
- 2 x M3 Nuts
Update: v2 of the base this out the 45 degree wall reducing print time. Also a few minor adjustments to the M3 nut slots.
Print Settings
- Supports: No
- Resolution: 0.2
- Infill: 25%