Snow or rain sheilds compatible with Ryobi PCL690 and PCL632 LED light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cause we play outdoors allot
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Designed to keep snow/rain out of the battery area of the PCL690 tripod and the out of the hinges and power button of the Ryobi PCL632 360deg LED light
The PCL690 cover allows only the 18v battery to power the tripod (it slides into the 40v battery socket to protect the contacts from water) Even the large 18v 12Ah battery fits under the cover!
Printing the PCL632 cover is better on the XL, I also used a reflective silver PETG for the underside which allows for softer indirect lighting with the LED panels facing the sky. There is also a non-XL version.
Suggested print settings:
- 0.25mm QUALITY
- PETG (pictured using OVERTURE PETG Grass Green)
- Infill density 15%
- Infill pattern Grid
- 3 Perimeters
- Supports are needed only on the PCL632 shield,
where the handle goes in, and under the protruding clip which keeps it in place
Don't have a 3D printer yet? That's OK, order already printed from…